Avaya

1608

Power (over Ethernet) compatibility:
barrel plug: 5.5/2.5 5V

	straight	crosslink
802.3af	yes	unknown
legacy	unknown	unknown
compatible	unknown	unknown
Unifi	unknown	unknown

Note:

• H.323 only
• default password 27238 (craft)

4620SW

Avaya 4620SW

• only uses pins 1,2,3 + 6 (100Base-T)
• PoE compatible
• custom power module available: GND:pin 7, +48V:pin 8
• upon booting (about 20 seconds), the following message appears:

  100 mbps ethernet (you might want to unplug the ethernet cable if the keys do not respond)

  * to program (after this step, you can plug in the ethernet connection again so you are able to type in the SIG command at the end)

• press *
• confirm every default with # (8x)
• at the end, it says "No new values. #=OK": confirm
• at the blank screen, type mute744# (Mute SIG#, you will notice a distinct short tick when pressing mute, and other keys being silent)
• change to SIP by cycling using * and confirm using #
• default password 27238 (craft)

You will need a TFTP server and the 46xxSettings.txt file (see Avaya's sample and a snippet from LeftyBC on github gist

Power (over Ethernet) compatibility:
barrel plug: none

	straight	crosslink
802.3af	yes	yes
legacy	no	no
compatible	yes	yes
Unifi	unknown	unknown

Note:

9608

Avaya 9608

9611

Power (over Ethernet) compatibility:
barrel plug: none

	straight	crosslink
802.3af	yes	unknown
legacy	unknown	unknown
compatible	unknown	unknown
Unifi	unknown	unknown

Note:

• default password 27238 (craft)

9650

Avaya 9650

• default password 27238 (craft)
• latest supported SIP firmware version seems to be 2.6.17.0
• also uses 46xxsettings.txt
  • $MACADDR is not usable in the config file
  • SKINS and CURRENT_SKIN doesn't work
  • CURRENT_CONTENT works: even the option of adding hidden menus
  • CURRENT_LOGO doesn't work
  • SET SIP_CONTROLLER_LIST is most likely numeric
  • no support for FORCE_SIP_*
• 8+1 auxiliary buttons are not programmable, only the 3 appLines, 4 softKeys and 5 hardButtons (calllog, contacts amenu, message, forward)
• doesn't handle 401 Unauthorized
• xopr had problems with ACK/BYE from the phone (it never hangs up and some calls will disconnect after ~30 seconds)

Power (over Ethernet) compatibility:
barrel plug: none

	straight	crosslink
802.3af	yes	yes
legacy	no	no
compatible	yes	yes
Unifi	unknown	unknown

Note: Location: xopr's (project crate and a bunch at home)

B189

Power (over Ethernet) compatibility:
barrel plug: none

	straight	crosslink
802.3af	yes	unknown
legacy	unknown	unknown
compatible	unknown	unknown
Unifi	unknown	unknown

Note: Features:

• default password 27238 (craft)
• H.323 only
• color touchscreen
• Gigabit ethernet (single port)
• Has mini USB: it doesn't power the device, it doesn't enumerate on the PC correctly and is marked "for future use" in the manual. Also booting with several button combinations didn't triger a valid USB port