Difference between revisions of "Siemens Gigaset"

From Hackerspace ACKspace
Jump to: navigation, search
m (added category)
(added Targa DIP phone 450 (Gigaset "clone") device. Cleanup small bobs)
Line 1: Line 1:
 
== general info ==
 
== general info ==
−
* The Targa DIP phone 450 (Sold years ago at Lidl) uses the same firmware as the SIEMENS Gigaset C450 IP but has different hardware (See [http://www.voip-info.org/wiki/view/Siemens+Gigaset+C450IP voip-info.org] and [https://github.com/neffs/gigahack/issues/1#issuecomment-36466764 github issue])
+
* The Targa DIP phone 450 (Sold years ago at Lidl) uses more or less the same firmware as the SIEMENS Gigaset C450 IP but has different hardware (See [http://www.voip-info.org/wiki/view/Siemens+Gigaset+C450IP voip-info.org] and [https://github.com/neffs/gigahack/issues/1#issuecomment-36466764 github issue])
 
* T-Home Sinus 501V also was a rebrand of Gigaset
 
* T-Home Sinus 501V also was a rebrand of Gigaset
 
* Interesting links:
 
* Interesting links:
Line 51: Line 51:
 
* '''Lookup Enabled''' (if available, version ≥ 240): yes
 
* '''Lookup Enabled''' (if available, version ≥ 240): yes
 
* '''Domain:''' ackspace.nl
 
* '''Domain:''' ackspace.nl
−
* '''Registration server: <leave empty>
 
 
* '''Proxy server address:''' <leave empty>
 
* '''Proxy server address:''' <leave empty>
 
* '''Proxy server port:''' <leave empty to trigger SRV lookup>
 
* '''Proxy server port:''' <leave empty to trigger SRV lookup>
Line 65: Line 64:
 
* '''Select network protocol:''' Automatic
 
* '''Select network protocol:''' Automatic
  
−
:Note that these settings take a while for the Gigaset to connecto to the right server.
+
:Note that these settings take a while for the Gigaset to connect to the right server (it might indicate an error at first).
 
:Also, make sure that under '''Settings''' » '''Telephony''' » '''Advanced VoIP settings''', '''SIP port:''' (or its random range) does not conflict with other SIP devices behind the same NAT.
 
:Also, make sure that under '''Settings''' » '''Telephony''' » '''Advanced VoIP settings''', '''SIP port:''' (or its random range) does not conflict with other SIP devices behind the same NAT.
 
}}</onlyinclude>
 
}}</onlyinclude>
 +
 +
 +
== Targa DIP phone 450 ==
 +
* [https://www.gebruikershandleiding.com/Targa-DIP-Phone-450/preview-handleiding-359609.html manual]
 +
* Runs on 6.5V (1.2-1.3W)
 +
* supports 6 GAP handsets
 +
* 6 handsets
 +
* 1 simultaneous call
 +
 +
{{PoE
 +
|Barrel_plug=unknown
 +
|Barrel_voltage=6.5V
 +
|802:3af_straight=no
 +
|802:3af_crosslink=no
 +
|Legacy_straight=no
 +
|Legacy_crosslink=no
 +
|Compatible_straight=no
 +
|Compatible_crosslink=no
 +
|Unifi_straight=no
 +
|Unifi_crosslink=no
 +
|Note=
 +
}}
 +
 +
<onlyinclude>{{#ifeq:{{{transcludesection|connecting_DIP_450}}}|connecting_DIP_450|
 +
=== connecting the [[Siemens_Gigaset#Targa_DIP_phone_450|Targa DIP phone 450]] ===
 +
SRV does not seem to work, and the ''port'' fields are not emptied.
 +
 +
Under '''Settings''' &raquo; '''Telephony''' &raquo; '''VoIP''', the following settings are needed:
 +
* '''Connection name or number:''' &lt;anything&gt;
 +
* '''Provider:''' Other provider
 +
* '''Authentication name:''' &lt;username&gt;
 +
* '''Authentication password:''' &lt;password&gt;
 +
* '''Confirm authentication password:''' &lt;password&gt;
 +
* '''Username:''' &lt;username&gt;
 +
* '''Display name:''' &lt;anything&gt;
 +
* '''Lookup Enabled''' (if available, version &ge; 240): yes
 +
* '''Domain:''' ackspace.nl
 +
* '''Proxy server address:''' sip.ackspace.nl
 +
* '''Proxy server port:''' 5060
 +
* '''Registrar server:''' sip.ackspace.nl
 +
* '''Registrar server port:''' 5060
 +
* '''Registration refresh time:''' 110
 +
* '''STUN enabled:''' Yes
 +
* '''STUN server address:''' stun.ekiga.net
 +
* '''STUN server port:''' 3478
 +
* '''STUN refresh time:''' 240
 +
* '''Outbound proxy mode:''' Automatic
 +
* '''Outbound proxy:''' sip.ackspace.nl
 +
* '''Outbound proxy port:''' 5060
 +
* '''Select network protocol:''' Automatic
 +
 +
:Note that these settings might take a while for the TARGA to connect to the right server (it might indicate an error at first).
 +
:Also, make sure that under '''Settings''' &raquo; '''Telephony''' &raquo; '''Advanced VoIP settings''', '''SIP port:''' (or its random range) does not conflict with other SIP devices behind the same NAT.
 +
}}</onlyinclude>
 +
 +
== notes ==
 +
[[User:Xopr|xopr]] had a look at the [https://teamwork.gigaset.com/gigawiki/display/GPPPO/FAQ+N510+Roaming+feature+-+How+to+configure (poor man's) roaming] option that is available.
 +
In short:
 +
* you need a "pro" handset that allows multiple base stations (4 is mentioned); when registering to a base station, this option automatically passes by
 +
* every handset needs to be registered to every basestation, so 24 registrations maximum
 +
* I had some success using an old Profoon PDX-2900:
 +
  * have base station registration activated before entering the PIN
 +
  * press and hold ➡️\📞👤 for 3 seconds (🔋 and 🛜 (or 📞👤) will blink)
 +
  * press and hold *️⃣🔕 for 3 seconds (it will prompt: <code>bS-_</code>
 +
  * choose <code>1</code> to <code>4</code> (it will prompt: <code>bS-4 PIN_</code>
 +
  * enter the base station's PIN code
 +
  
 
[[Category:Telephony]][[Category:PoE]]
 
[[Category:Telephony]][[Category:PoE]]

Revision as of 20:35, 3 January 2025

general info

N510 IP PRO

  • manual
  • Runs on 6.5V (1.2-1.3W)
  • supports 6 GAP handsets
  • 6 handsets
  • up to 4 simultaneous calls
  • Supports IEEE802.3af (PoE)
  • Info Center support (TBD)


Power (over Ethernet) compatibility:
barrel plug: unknown 6.5V

straight crosslink
802.3af yes yes
legacy no no
compatible yes yes
Unifi no no

Note:

The device supports two distinctive rings; default (extenal) and alert-internal: 

Alert-Info: <http://www.notused.com>;info=alert-internal

Exposed internals:

  • PCB front (where the button goes on top of the led on the center bottom) Blurry image, sorry

  • PCB back

  • Note the clips to open the case

  • Note the pins to open the case

connecting the N510 IP PRO

Under Settings » Telephony » Connection, the following settings are needed:

  • Connection name or number: <anything>
  • Provider: Other provider
  • Authentication name: <username>
  • Authentication password: <password>
  • Username: <username>
  • Display name: <anything>
  • Lookup Enabled (if available, version ≥ 240): yes
  • Domain: ackspace.nl
  • Proxy server address: <leave empty>
  • Proxy server port: <leave empty to trigger SRV lookup>
  • Registration server: <leave empty>
  • Registration server port: <leave empty to trigger SRV lookup>
  • Registration refresh time: 110
  • STUN enabled: Yes
  • STUN server address: stun.ekiga.net
  • STUN server port: 3478
  • STUN refresh time: 240
  • Outbound proxy mode: Automatic
  • Outbound proxy port: <leave empty to trigger SRV lookup>
  • Select network protocol: Automatic
Note that these settings take a while for the Gigaset to connect to the right server (it might indicate an error at first).
Also, make sure that under Settings » Telephony » Advanced VoIP settings, SIP port: (or its random range) does not conflict with other SIP devices behind the same NAT.


Targa DIP phone 450

  • manual
  • Runs on 6.5V (1.2-1.3W)
  • supports 6 GAP handsets
  • 6 handsets
  • 1 simultaneous call


Power (over Ethernet) compatibility:
barrel plug: unknown 6.5V

straight crosslink
802.3af no no
legacy no no
compatible no no
Unifi no no

Note:

connecting the Targa DIP phone 450

SRV does not seem to work, and the port fields are not emptied.

Under Settings » Telephony » VoIP, the following settings are needed:

  • Connection name or number: <anything>
  • Provider: Other provider
  • Authentication name: <username>
  • Authentication password: <password>
  • Confirm authentication password: <password>
  • Username: <username>
  • Display name: <anything>
  • Lookup Enabled (if available, version ≥ 240): yes
  • Domain: ackspace.nl
  • Proxy server address: sip.ackspace.nl
  • Proxy server port: 5060
  • Registrar server: sip.ackspace.nl
  • Registrar server port: 5060
  • Registration refresh time: 110
  • STUN enabled: Yes
  • STUN server address: stun.ekiga.net
  • STUN server port: 3478
  • STUN refresh time: 240
  • Outbound proxy mode: Automatic
  • Outbound proxy: sip.ackspace.nl
  • Outbound proxy port: 5060
  • Select network protocol: Automatic
Note that these settings might take a while for the TARGA to connect to the right server (it might indicate an error at first).
Also, make sure that under Settings » Telephony » Advanced VoIP settings, SIP port: (or its random range) does not conflict with other SIP devices behind the same NAT.

notes

xopr had a look at the (poor man's) roaming option that is available. In short:

  • you need a "pro" handset that allows multiple base stations (4 is mentioned); when registering to a base station, this option automatically passes by
  • every handset needs to be registered to every basestation, so 24 registrations maximum
  • I had some success using an old Profoon PDX-2900:
  * have base station registration activated before entering the PIN
  * press and hold ➡️\📞👤 for 3 seconds (🔋 and 🛜 (or 📞👤) will blink)
  * press and hold *️⃣🔕 for 3 seconds (it will prompt: bS-_
  * choose 1 to 4 (it will prompt: bS-4 PIN_
  * enter the base station's PIN code
Retrieved from "https://ackspace.nl/w/index.php?title=Siemens_Gigaset&oldid=9916"