Difference between revisions of "ToneScript"
(first draft of the ToneScript variables) |
m (typo) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 22: | Line 22: | ||
|- | |- | ||
| Congestion/reorder tone, All Trunks Busy | | Congestion/reorder tone, All Trunks Busy | ||
− | | | + | | Congestie-/overbelastingstoon |
| 425Hz | | 425Hz | ||
| 0.25/0.25 | | 0.25/0.25 | ||
Line 45: | Line 45: | ||
| <code>F1=450@-17,c=0/0;</code> | | <code>F1=450@-17,c=0/0;</code> | ||
|- | |- | ||
− | | Special | + | | Special dial tone/call forward |
| Dienst doorschakelen | | Dienst doorschakelen | ||
| 425Hz | | 425Hz | ||
Line 67: | Line 67: | ||
| | | | ||
| | | | ||
− | | <code></code> | + | | <code>950@-16,1400@-16,1800@-16;20(.330/0/1,.330/0/2,.330/0/3,0/1/0)</code> |
|- | |- | ||
| Waiting tone | | Waiting tone | ||
Line 76: | Line 76: | ||
| Call Waiting Tone | | Call Waiting Tone | ||
| <code>f1=425@-13,c=500/9500;</code> | | <code>f1=425@-13,c=500/9500;</code> | ||
+ | |- | ||
+ | | Intrusion tone/listen in | ||
+ | | Opschakeltoon | ||
+ | | | ||
+ | | | ||
+ | | 8G1A1B1C21A1B1C2 | ||
+ | | | ||
+ | | probably <code>425@-17,450@-17,500@-17,525@-17425@-17,450@-17,500@-17,525@-17,c=250/0,250/0,250/0,250/0,250/0,250/0,250/0,250/0;</code> | ||
+ | |- | ||
+ | | | ||
+ | | Snelle ratel | ||
+ | | | ||
+ | | | ||
+ | | 16A1 | ||
+ | | | ||
+ | | probably <code>f1=450@-17,c=125/125;</code> | ||
+ | |- | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | Confirmation Tone | ||
+ | | <code>f1=350@-11,f2=440@-11,c=100/100-100/100-100/100;</code> | ||
+ | |- | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | Prompt Tone | ||
+ | | <code>f1=350@-17,f2=440@-17,c=0/0;</code> | ||
+ | |- | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | Conference Party Hangup Tone | ||
+ | | <code>f1=425@-15,c=600/600;</code> | ||
+ | |- | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | Special Proceed Indicator Tone | ||
+ | | <code>f1=350@-13, f2=440@-13, c=750/750-0/0;</code> | ||
|} | |} | ||
+ | |||
+ | === syntax === | ||
+ | : <code>f1=val[,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]];</code> | ||
+ | : (Frequencies are in (10, 4000) Hz and cadence on and off are in (0, 64000) ms) | ||
+ | : (cadence on and off are in (0, 16000) ms) | ||
+ | |||
+ | === notes === | ||
+ | The first dutch dial tone was a combination of 150 Hz and 450 Hz (at least until up to 1977). The second dial tone was 450 Hz with electromechanical systems and 425 Hz with computer controlled exchanges. | ||
+ | |||
+ | When the second dial tone was abolished on October 10, 1995, no more electromechanical exchanges existed and the frequency of the second dial tone was used for the dial tone. | ||
+ | |||
+ | === resources === | ||
+ | * https://telecomerfgoed.nl/ ([https://telecomerfgoed.nl/index.php/publicaties/6-studieblad-ptt/39-studieblad-ptt-1977?download=515:1977-10 Studieblad 1977-10 pdf]) | ||
+ | * https://www.circuitsonline.net/forum/view/163226/last | ||
+ | * https://verstraten-elektronica.blogspot.com/p/plain-old-telephone-service.html | ||
+ | * https://nl.wikipedia.org/wiki/Telefoontonen | ||
+ | * http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf | ||
+ | * https://en.wikipedia.org/wiki/ToneScript | ||
[[Category:Telephony]] | [[Category:Telephony]] |
Latest revision as of 20:41, 31 March 2024
Here is a collection of ToneScript notation tones for use in telephony.
Note that this list is not yet complete.
EN | NL | Frequency | Timing (on/off) | Note | ATA name (Grandstream) | ToneScript syntax |
---|---|---|---|---|---|---|
Busy tone | Bezettoon | 425Hz | 0.5/0.5 | 4G1 | Busy Tone | f1=425@-17,c=500/500;
|
Congestion/reorder tone, All Trunks Busy | Congestie-/overbelastingstoon | 425Hz | 0.25/0.25 | 8G1 | Reorder Tone | f1=425@-17,c=250/250;
|
Dial tone | Kiestoon | 425Hz | continuous | G1 | Dial Tone | f1=425@-17,c=0/0;
|
2nd Dial tone | 2e Kiestoon | 450Hz | continuous | E2 | F1=450@-17,c=0/0;
| |
Special dial tone/call forward | Dienst doorschakelen | 425Hz | 0.5/0.05 | f1=425@-17,c=500/50;
| ||
Ringing/ringback tone | Wektoon | 425Hz | 1/4 | can be double ringback (British) | Ringback Tone | f1=425@-17,c=1000/4000;
|
Special Information Tone/SIT | Informatietoon | 950 Hz, 1400 Hz, 1800 Hz | 0.333,0.333,0.333/1 | 950@-16,1400@-16,1800@-16;20(.330/0/1,.330/0/2,.330/0/3,0/1/0)
| ||
Waiting tone | Houdtoon/wachttoon | 425Hz | 0.5/9.5 | Call Waiting Tone | f1=425@-13,c=500/9500;
| |
Intrusion tone/listen in | Opschakeltoon | 8G1A1B1C21A1B1C2 | probably 425@-17,450@-17,500@-17,525@-17425@-17,450@-17,500@-17,525@-17,c=250/0,250/0,250/0,250/0,250/0,250/0,250/0,250/0;
| |||
Snelle ratel | 16A1 | probably f1=450@-17,c=125/125;
| ||||
Confirmation Tone | f1=350@-11,f2=440@-11,c=100/100-100/100-100/100;
| |||||
Prompt Tone | f1=350@-17,f2=440@-17,c=0/0;
| |||||
Conference Party Hangup Tone | f1=425@-15,c=600/600;
| |||||
Special Proceed Indicator Tone | f1=350@-13, f2=440@-13, c=750/750-0/0;
|
syntax
f1=val[,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]];
- (Frequencies are in (10, 4000) Hz and cadence on and off are in (0, 64000) ms)
- (cadence on and off are in (0, 16000) ms)
notes
The first dutch dial tone was a combination of 150 Hz and 450 Hz (at least until up to 1977). The second dial tone was 450 Hz with electromechanical systems and 425 Hz with computer controlled exchanges.
When the second dial tone was abolished on October 10, 1995, no more electromechanical exchanges existed and the frequency of the second dial tone was used for the dial tone.
resources
- https://telecomerfgoed.nl/ (Studieblad 1977-10 pdf)
- https://www.circuitsonline.net/forum/view/163226/last
- https://verstraten-elektronica.blogspot.com/p/plain-old-telephone-service.html
- https://nl.wikipedia.org/wiki/Telefoontonen
- http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
- https://en.wikipedia.org/wiki/ToneScript