Difference between revisions of "Network information"
(Added management IP addresses) |
(→Management IPs) |
||
| Line 19: | Line 19: | ||
== current setup == | == current setup == | ||
=== Management IPs === | === Management IPs === | ||
| − | * Hackspace: 192.168.1. | + | * stAckwall: 192.168.1.1 |
| − | * Stackspace: 192.168.1. | + | * Hackspace: 192.168.1.10 |
| − | * Slackspace: | + | * Stackspace: 192.168.1.11 |
| + | * Slackspace: 192.168.1.12 | ||
=== trunks === | === trunks === | ||
Revision as of 20:30, 29 January 2022
Contents
synopsis
I've (xopr) created this network information page mainly because no-one knows the current setup by heart, and I'm preparing for Congress everywhere without breaking people's precious downloads..
current setup
Management IPs
- stAckwall: 192.168.1.1
- Hackspace: 192.168.1.10
- Stackspace: 192.168.1.11
- Slackspace: 192.168.1.12
trunks
- hACKswitch - router
- hACKspace - slACKspace (unused)
- hACKswitch - slACKswitch
VLANs
- 2. LAN
- 10. DMZ
- 11. VoIP
connections
slACKswitch
Probably connected to fuse group A.
| VLAN | 2u | 2u | 2u | 2u | 2u | 2u | 2u | 2u |
| Port | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 |
| Port | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16: Trunk 3 |
| VLAN | 2u | 2u | 2u | 2u | 2u | 2u | 2u | trunk |
hACKswitch
Connected to fuse group A.
| VLAN | 2u | 2u | 2u | 2u | 2u | 2u | 2u | 2u | 2u | 2u | trunk | trunk |
| Port | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 14: Printer | 17: VoIP | 19: VoIP | 21: stack | 23: Trunk 3 |
| Port | 2 | 4 | 6 | 8 | 10 | 12: ACKade | 14: Solder | 16: 3D PC | 18 | 20: Cam | 22: Srv T | 24 |
| VLAN | 2u | 2u | 2u | 2u | 2u | 2u | 2u | 2u | 2u | 2u | trunk | 2u |
router
The Linksys router is connected to both fuse groups A and B (via two adapters and a schottky diode splitter).
It is running stock firmware to ensure basic internet connectivity in the space. Config is kept KISS for this reason.
| VLAN | 'WAN' | 2u | 2u | 2u | 2u | |
| Port | WAN | 1 | 2 | 3 | 4 |
Spacenet AP
Configured all ports as a switch. DHCP disabled. At this point only used for spacenet and can be used for experiments. Runs OpenWRT.
| VLAN | 2u | 2u | 2u | 2u | 2u | |
| Port | WAN | 1 | 2 | 3 | 4 |
Legend
| WAN / unsecured |
| DMZ / VPN |
| VoIP / telephony |
| trunk / backbone |
| LAN |
| test / special |
| servers / core infra |
| wireless / guest |
notes
- Da Syntax and xopr redid all the cabling on February 13th 2016. All static cables are labeled on both sides, tucked away thoroughly, trimmed, and plugged in documented ports. Please keep the label on (and updated) at all times. You can find the label-tywraps in the network-connector box in the stACKspace.
- Want to connect something? No problem; just pick any free port (except port 18 (DMZ), that won't work).
- Want a permanent connection? Should be no problem; make sure everyone is informed (via the discussion page, for example, so we can reach consensus).
